serial storage
英 [ˈsɪəriəl ˈstɔːrɪdʒ]
美 [ˈsɪriəl ˈstɔːrɪdʒ]
网络 串行存储器; 串联储存
双语例句
- Serial Attached SCSI ( SAS) was developed to address the I/ O and direct-attach storage requirements that the traditional parallel SCSI could not meet.
开发SerialAttachedSCSI（SAS）的目的是满足传统的并行SCSI无法满足的I/O和直接连接存储需求。 - This mix can include FDDI, ATM and IBM's Serial Storage Architecture, as well as Fibre Channel.
这种混合可以包括FDDI、ATM和IBM的串行存储体系结构，以及光纤通道。 - A time measurement for a given computer word to pass a given point as in serial storage delay-lines.
在串行存储延迟线中，计算机字通过某指定点的一种时间度量。 - For added security, an inventory report, complete with serial numbers and pictures, can be printed for off-site storage.
为了增加可靠性，一份存货报表，具有连续的数字和图形，它能够在位置存储过程中被打印。 - The Design of Serial E~ 2PROM Storage System Based on I~ 2C Bus
基于I~2C总线串行E~2PROM的存储系统设计 - The use of multi-channel buffered serial port MCBSP is to achieve SPI bus ( mode of) data collection, and the real-time data transmission and storage is achieved by the use of two DMA controllers.
利用多通道缓存串行口MCBSP实现SPI总线方式的数据采集，并采用两个DMA控制器实现了数据的实时传输和存储。 - Serial flash with SPI interface is used to avoid losing data and meet the demand of large storage.
具有SPI接口的串行Flash用于存放汉字库及操作结果，既可以防止掉电数据丢失又能够满足大容量存储的需要。 - The display and control software is made up of several modules, include the Radar interface 、 graphical display module 、 serial communication module 、 PC104-plus interface module 、 database storage module.
显控软件设计主要包括雷达显控界面、图形显示模块、串行通信模块、PC104-plus接口模块、数据库存储模块等部分的设计。 - This system is mainly comprised of a database management module, a serial port communication module and a data analysis module. This system has realized effective storage and analysis of online measured data to find faulty capacitances.
系统主要由数据库管理模块、串口通信模块、数据分析模块组成，实现了铁路线上使用的UM71移频电容测量数据的管理及电容故障趋势预测分析等功能。 - Application of Serial Communication in Automatic Storage and Retrieval System
串口通讯在自动化仓库控制系统中的应用 - Application of Serial Mechanical Seal and Storage System in Benzene Products Pump of Aromatics Workshop
串联机械密封及储罐系统在芳烃装置苯类产品泵上的应用 - Design and Application of the Data Collection from the Serial Port of Computer and Data Storage
计算机串口数据采集与数据存储的设计与应用 - The comparison with the calculation result by means of serial solution method shows that the proposed method not only elevates the computational efficiency but also reduces the storage on a single computer making the parallel system can be used to numerically simulate the wave transformation in large area.
与对应的串型算法得到的结果比较表明，本文的并行数值方法不仅可以提高数值模拟效率，而且可以大大减少单机的存储容量，从而使该系统可以进行更大区域的波浪变形的数值模拟。 - Serial ATA is a compatible substitute interface to par-allel ATA by introducing into many new technologies. It will be a potential choice and development to the fields of desktop ap-plication and network storage.
串行ATA技术是一种代替并行ATA的接口技术，在保持与PATA兼容的前提下，引入了大量的新技术，是桌面应用和网络存储领域最具潜力的技术之一。 - The functions to separate the real-time serial data received and achieve the dynamic storage for the data to database utilizing the user-defined-message function during communication, as well as display the serial data dynamically in the document-window realizing by the timer technology are programmed and realized.
并重点编程实现了利用自定义消息函数把接收到的实时串行数据进行有效分离、在通信时实现数据向数据库的动态转存，以及利用定时器技术实现串行数据在文档窗口的动态显示等功能。 - For different generating sets, corresponding ways of communication are adopted for data transfer, including DDE communication, UDP communication and serial port communication, and storage ways are selected for the data.
针对不同的机组，采用了相应的通信方式：动态数据转换（DDE）通信、UDP通信和串口通信，进行数据传输，并对这些数据选用了合适的存储方式。 - The Universal Serial Bus Mass Storage Class Specification defines standard transport protocol and commands set for storage device that performs communication through USB. Therefore any host/ device compatible with these specifications can communicate with each other directly.
USB海量存储设备类规范为通过USB连接的存储设备规定了标准的传输协议和命令集，任何符合此规范的主机和设备都可以直接进行通讯。 - Procedures for the preparation of PC are compiled using C++ Builder. Action of DSP which controlled by serial communication was carried out and, the visualization of the data output, data storage, and query capabilities were achieved.
采用C++Builder编写上位机程序，完成通过串口通讯来控制DSP的动作，实现数据的可视化输出、数据的存储和查询等功能。 - Specific features include: serial transmission, network communication base on the TCP/ IP, data storage.
具体功能包括：串口传输、基于TCP/IP网络通信、数据存储等。 - Serial Advanced Technology Attachmen ( tSATA) interface, which transports data from computer to mass storage system or inverse by serial mode, is a new developing interface connecting host to storage system in a few years.
串行高技术附件（SATA）接口技术是连接主机和存储系统的新兴接口技术，其采用串行方式进行数据传输。 - The system achieves serial transmission and designs network transmission. PC implements database storage, management and printing report forms.
上位机为PC机，实现了与下位机的串行传输，设计了以太网传输，并实现了对所采集数据的存储、管理和打印报表等功能。 - Completed the software design, including the AD conversion program, adaptive filtering program, serial communications program; and PC software design, including serial communication procedures, real-time display procedures, data storage procedures. 4.
完成了对系统的软件设计，包括A/D转换、自适应滤波、串口通信等程序；以及上位机的软件设计，包括串口通信、实时显示、数据储存程序。 - There are some modules in the interface software, such as serial communication port control module, data acquisition control module, data waveform display module, data storage module, data playback module and the system working state display module.
上位机监控程序的功能模块包括控制串口通信的模块、控制下位机数据采集子系统工作的模块、数据波形显示和数据保存模块以及数据回放和采集系统的工作状态显示模块。 - In the control system designed, the PC communicates with PLC via serial communication, the necessary control information and parameter setting data are input storage area and real-time data of PLC feedbacks are got.
在所设计的控制系统中，上位机通过串行通信与PLC实现通讯，将必要的控制信息和参数设置信息写入PLC的数据存储区并实时获得PLC反馈数据。 - Measurement datas are transmitted to the computer through the serial port, PC application programs complete the automatic data processing, according to the need for storage and printing.
测量数据通过串行口送给上位机，由上位机的应用软件控制自动完成数据处理，按需要进行存储、打印。 - According to the specific requirements of the serial port expansion module, the partition is divided into three parts: serial data sending receiving module, data storage module and control module.
本论文应用硬件描述语言进行多串口扩展系统的设计，根据多串口扩展模块的具体要求又将该部分划分为串口数据发送接收模块、数据存储模块、控制模块三个部分。 - The software includes the system control program and the analysis program on PC. The system control program consists of the main procedure, initialization module, timer interruption module, data processing module, alarm module, serial communication module and storage module.
软件包括单片机软件和PC机分析软件。单片机软件由主程序、初始化模块、定时器中断模块、数据处理模块、报警模块、串口通信模块和存储模块组成。 - The system designed and implemented six functional modules including serial receiving, data processing, data displaying, lesion detecting, data storage and data transmission.
本系统设计并实现了串口接收、数据处理、波形显示、病变检测、数据存储和数据发送六个功能模块。 - IEEE 1394 serial bus has put Point-to-Point data transfer into reality as a kind of open technology standard. And it has been widely applied in video and audio areas, including digital imaging, multimedia, mass storage and so on.
IEEE1394串行总线作为一种数字传输的开放式技术标准实现了真正的点到点的数据传输，被广泛应用于视频、音频领域，包括数字成像领域以及多媒体、大容量存储领域等等。 - Using multithreading technology in WinCE applications, by creating a thread to receive the data of each serial communication port, in the thread to complete the corresponding data processing, display and storage.
在WinCE应用程序中使用了多线程技术，对每路串口数据的接收都创建了一个线程，在线程中完成相应数据的接收，处理，显示，存储。